MICROSAMPLER 10P ® device is a portable type composite sampling unit that can take samples from industrial wastewater, factory manholes and manholes, streams, water channels and all kinds of liquids that need to be examined.

The microprocessor, smart type electronic control unit, which can work with a rechargeable battery and adapter, can be programmed to take samples according to time, can make multiple or single acquisitions, and can work with external pulses.

It is produced especially for use in open areas and places where there is no external energy supply. Thanks to the cleanable type stainless filter suction line, particles in the waste water are prevented from reaching the pump and damaging the special hose.

Thanks to the easy menu interface and keypad, the sample amount, sampling intervals and when the first sample will be taken can be programmed by the user. After each sample taken, the pump works in reverse, draining the water remaining in the suction hose and ensuring that the line remains clean for the next sample. Reverse operation time can be adjusted according to the suction hose length.

Thanks to the standard level switch on it, it prevents overfilling by giving a warning when the sample container is full. At this time, it also gives an alarm output.

MICROSAMPLER 10P ® device is equipped with a very special measurement system that allows sampling by simply entering the desired amount without entering the suction height, hose diameter and hose length, thanks to the flow meter system that was first discovered and used by MICROLEVEL ® .

The outer body of the device is made of material that is extremely resistant to impacts and weather conditions. It is suitable for locking when necessary to prevent malicious people from opening it.

Due to its working style and structure, it must be kept in an upright position. Care should be taken to prevent it from tipping over in extreme wind or due to operator error.

Otherwise, the liquid sample in the sample container will spill and cause permanent damage to the device.

TECHNICIAL SPECIFICATIONS

Sampling Method: Composite

How it Works: By time, by flow, manual

Suction Height: 8 meters

Sample Container Volume: 10 liters

Suction Hose: 6m, 8x12mm PVC hose with filter

Pump/Tube: Peristaltic type / Norprene

Power: 12V 7A battery and adapter

Operating Temperature: 0...70°C

Sampling Range: Adjustable between 1 minute and 24 hours

Sample Quantity: Adjustable from 10ml to 9999ml